Spectra-precision Survey Pro v4.5 Ranger User Manual Manual do Utilizador descarregar pdf (Página 64)

100

101

User’s Manual – Conventional Mode

Scenario Four

You have only one known point on a job.

Solution

You have two options in this situation. One, you can assume an

azimuth for an arbitrary backsight reference and rotate the job later

using the Rotate

routine once you have determined the actual

orientation.

Secondly, you can use the Sun Shot routine to determine an azimuth

to an arbitrary reference.

Summary

In general, you would follow these steps when you begin working on a

job.

1. Create a new job or open an existing job.

2. Setup over the Occupy Point.

3. Aim the total station toward the backsight and zero the

horizontal angle on the instrument.

4. Fill in the Backsight Setup

screen and tap Solve , then (close).

If the Always Prompt for Backsight Check option is checked in the

Job > Settings > General screen, you will be prompted to check

your backsight.

5. Start your survey.

Note: You should enter the correct Height of Instrument and Height of

Backsight distances in the Backsight Setup screen if you plan to check

your backsight using the Check by Distance routine.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 338 339

Comentários a estes Manuais

Sem comentários

Spectra-precision Survey Pro v4.5 Ranger User Manual Manual do Utilizador Página 64

Comentários a estes Manuais

Manuais e produtos relacionados com Software Spectra-precision Survey Pro v4.5 Ranger User Manual