Spectra-precision Survey Pro v4.6 Recon-Nomad Reference Manual Manual do Utilizador descarregar pdf (Página 267)

100

101

Survey Menu – Basic GPS Module

R-259

Data Collection

Survey Data Collection.

The Data Collection screen is used to collect GPS measurements and

store new points in the job.

GPS Status (at top of screen): displays the current

solution type, the data modem reception quality, the

number of satellites used and the horizontal precision

computed by the receiver. When this area is tapped, the

GPS Status

screen will open (Page R-178).

Point: is where you enter the point name for the next

point to be stored.

Desc: is where you enter the description for the next

point to be stored.

Set HR : displays the current antenna measurement and

measure to setting. You can change the antenna

measurement by entering a new value in the edit box.

This new antenna height will be sent to the receiver with

your next data collection point. You can change both the

antenna measurement and measure to setting by tapping on Set HR

to open the Receiver Antenna screen (Page R-191).

Traverse : opens the Traverse Base screen, described below.

Control : opens the Control Points screen (Page R-202).

Topo SS : stores a point with a single epoch of data. The current

position is checked against the criteria, and if acceptable, the point is

stored.

Note: The Topo SS function never puts the receiver in static mode, so

the precision of the rapid side shot will be less than a point occupied

in static mode.

Feature : opens the Feature Collection screen (Page R-198), where

various automatic and manual data collection options are available.

1 2 ... 262 263 264 265 266 267 268 269 270 271 272 ... 480 481

Comentários a estes Manuais

Sem comentários

Spectra-precision Survey Pro v4.6 Recon-Nomad Reference Manual Manual do Utilizador Página 267

Comentários a estes Manuais

Manuais e produtos relacionados com Software Spectra-precision Survey Pro v4.6 Recon-Nomad Reference Manual