Spectra-precision ADLCONF User Guide Manual do Utilizador descarregar pdf (Página 35)

ADLCONF User Guide

Printing Radio Settings

To create a file describing the current configuration of the attached radio, select File / Save

Report. To print the configuration without creating a file, click Print on the right of the

ADLCONF screen:

On the subsequent Print screen, select the printer you want to use and then click

OK.

Note – The configuration displayed on the ADLCONF software may not be the same as the

configuration in the attached radio. The ADLCONF software displays a radio’s configuration

as soon as you connect to the radio. However, you can import a configuration file from your

computer by selecting File / Import. You can also use the ADLCONF software to edit parts of

the displayed configuration. The imported or edited configuration displayed on the ADLCONF

software is not written to the radio until you click

Program. If you click Print before clicking

Program, the configuration that is printed is of the radio, not what appears in the ADLCONF

software.

An asterisk in the ADLCONF title bar indicates that the displayed configuration has

changed:

Closing the ADLCONF Program

There are three ways to close the ADLCONF software:

• Click

Exit

• Click the X at the top right corner

• Select File / Exit

Closing the ADLCONF software puts an attached radio back into data mode.

When you close the ADLCONF software after changing any setting without programming

the change(s) to a radio, the following message appears:

• Click Export to write a configuration file to a selected location on your computer

and close the ADLCONF software.

• Click

Program to write the new configuration to the attached radio and then close

the ADLCONF software.

• Click

Continue to discard the changes and close the ADLCONF software.

• Click

Cancel to return you to the ADLCONF software without making any changes

to the radio.

You must save changes before closing the program or you will lose them:

1 2 ... 30 31 32 33 34 35 36

Sem comentários

Spectra-precision ADLCONF User Guide Manual do Utilizador Página 35