Spectra-precision FAST Survey Reference Manual Manual do Utilizador descarregar pdf (Página 148)

p146

A read function is required to update the directional display information. You should see your points in the map with an

icon showing your target location (the circle with the X inside).

Measurements are taken typically by pressing

Enter

also transitions automatically from the Stake Points entry

screen to the Stk Pt measurement screens above. Point Stakeout can be conducted without touching the screen, using

the

Enter

key and entering point IDs using the keyboard. Both screens are explained below, starting with the graphic

Stk Pt screen.



Total Station or Robotic Total Station running Direct

: After reading and taking the shot, the display will be

updated with a distance and direction to the stakeout point. Buttons on the right from top to bottom are Read,

Store, Next, Menu, Configure and Setup.

Enter

is treated as

for

Read

. Pressing

(or "Store to Collector" icon,

2nd from top right) will go to the

Stakeout Report

screen and allow you to write to the "cutsheet" file the cuts and

fills and optionally to store the measurement as a new point ID.



GPS or Robotic Total Station with Tracking On:

Your current position is read immediately (no Read button

needed).

takes a fresh reading. If you press

for

Read

for

Store

, you will go to the

Stakeout Report

Screen.

Enter

is treated as

for

Read

and takes a fresh reading, then proceeds to the

Stakeout Report

screen. If

you are outside of accuracy tolerance, you will be warned and asked if you wish to proceed. In the

Stakeout

Report

screen, you can save your cut and fill data to a cutsheet file and optionally store a new point ID based on

the fresh measurement taken. If you click off tracking, then the angle to turn for staking is displayed, same as with

regular total stations running direct. With robotic total stations, if you are locked on and tracking, you will see

instantaneous instructions on directions to move to the point, meaning that you do not neeed to take a reading to

locate the point. Just move to the point based on the instructions. If the screen is not updating, it is recommended

to turn off lock and then re-acquire lock by tapping the lock icon twice, verifying that tracking also is on. Then the

instructions to move will stream in real-time.



Robotic and Motorized Total Stations, "Turn to Point"

: In Total Station, Search Tab (Equip menu, or

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 397 398

Comentários a estes Manuais

Sem comentários

Spectra-precision FAST Survey Reference Manual Manual do Utilizador Página 148

Comentários a estes Manuais

Manuais e produtos relacionados com Software Spectra-precision FAST Survey Reference Manual