Spectra-precision Survey Pro v4.5 Ranger Reference Manual Manual do Utilizador descarregar pdf (Página 426)

100

101

Survey Pro Reference Manual

R-418

zeroed on a design point is meaningless once the design point has

been staked.

Note: The Circle Zero button is not available when using a robotic

total station.

< Back : returns to the previous screen.

Stake > : opens the final Stake Road screen where the shots to the

stake point are performed.

Stake Road – Screen Four

Height of Rod: is the length of the rod.

Design Elev: displays the current design

elevation, which can be modified with the

Change… button.

FORWARD / BACK: indicates if the rod must

move forward (toward the total station) or

backward (away from the total station).

Go RIGHT / Go LEFT: indicates if the rod must

move to the right or left from the total station’s

point of view.

EDM: This button can be toggled to shoot in various EDM modes.

The options available depend on the total station being used. Consult

the total station’s documentation for more information on the EDM

modes that it supports.

CUT / FILL: displays the required amount of cut or fill to bring the

stake point to the design point’s elevation.

Rod Elev: displays the elevation at the rod’s location computed from

the last shot.

Change… : is used to modify the current design elevation, which will

also modify the associated CUT/FILL value for the current station

being staked.

1 2 ... 421 422 423 424 425 426 427 428 429 430 431 ... 474 475

Comentários a estes Manuais

Sem comentários

Spectra-precision Survey Pro v4.5 Ranger Reference Manual Manual do Utilizador Página 426

Comentários a estes Manuais

Manuais e produtos relacionados com Software Spectra-precision Survey Pro v4.5 Ranger Reference Manual